Information about our Garage Tile Product
|
 |
| Your new Garage Floor! |
|
| Specifications:
Gray and Black Interlocking Tiles are made up of flexible vinyl composite with 100 % recycled content, including 25% post-consumer content.
Special Order Interlocking Tiles of Blue, Green, Red, Yellow or Beige are made up of flexible vinyl composite with minimum 10% recycled content, including 5% post-consumer content.
Dimensions 24” x 24”
(Coverage 23.75" x 23.75" or 3.92sq/ft. per tile)
Thickness 0.22”
Weight 6.1 lbs. average per tile
Effective coverage 3.92 sq. ft.
Connection Interlocking edges
Abrasion resistance ASTM Taber Method 500 gram wheel 1,000 cycles, <0.4 grams weight loss.
Reference specification ASTM F-1306
Smoke density ASTM E-662: Class 1 <450
|
Specifications:
Critical radiant flux ASTM E-648: Meets Class 1 fire rating >0.45 watts/cm²
Coefficient of friction ASTM D-2047: 0.7-.08 (depending on surface). Conforms to ADA specifications. Not intended for ramps.
Static load resistance ASTM F-970: >2,000 psi
|
 |
| 24"x24" Grey Tile |
|
|
 |
| Tiles easily Interlock |
|
| Installation Instructions
Installation:
Tools required:
Chalk line, hard plastic mallet, and utility knife.
1. Repair any major surface imperfections in the floor. Large cracks, etc.
2. Using a hard plastic mallet, interlock tiles along the garage door openings. The idea is to have the tile cuts and smaller pieces along the edges and back of the garage. Continue into the garage toward the back and sides. Leave a 3/8" gap around the perimeter to allow for expansion and contraction.
Tiles can be cut using a utility knife or other tool capable of cutting vinyl flooring. Protective equipment and safety measures should always be followed.
Maintenance:
The tiles can be cleaned with a diluted ammonia and water solution. A power scrubber or buffer can also be used. No waxes or sealant should be used.
|
These tiles are tough stuff!
5% acetic acid - No effect
Acetone - No effect
28% ammonia - No effect
Animal blood - No effect
Carbon tetrachloride - No effect
Chloroform - No effect
Cottonseed oil - No effect
95% ethyl alcohol - No effect
Ethyl acetate - No effect
37% formaldehyde - No effect
Gasoline - No effect
30% hydrogen peroxide - No effect
Methanol - No effect
Mineral Oil - No effect
0.5% muriatic acid - No effect
50% sodium hydroxide - No effect
98% sulfuric acid - No effect
Tallow - No effect
2% tincture of iodine - No effect
Trichloroethylene - No effect
| |
|
